Complete Build Journal

11/16/2015

Adjustment for Koni Shock and spacer

Today I made the spacer that was needed to slip into the lower DS shock mount.  All I did was take a 1/2 nut and drill through it, and shave off a little off the top.  It's the one on the right.


I also put the Konis into their softest ride position.  This will help with the ride on the street.

These are 30 Series shocks that I have.  See the following link for adjustment instructions.  I believe the recommendation for street ride is ZERO position for the front and the ONE position for the rear.